Difference between revisions of "Auto Engine Tuning Fundamentals"

Latest revision as of 04:25, 13 March 2021

Water is a very inexpensive fuel. The cost that needs to be invested is for detailed plans of how to convert your car to a car running on water, $67. Then the materials will set you back around $170.00.This is a very small investment for the savings that will be reaped in the coming weeks.

overhaul a care engine Learn about your competition. Yes, do consider this before you start talking to your prospect. Yes, it can benefit you in the future if it is a lesson after the loss. You are likely to cross paths with the competition in the future whether it is another company, a relative, or even a 'no' decision from a prospective client.

There are some very talented designers out there, but most don't know a lot about web development. Many will design a workable site for a low cost, but if for some reason he isn't reachable any longer or quits, you are stuck with a site you can do little with until you find someone else to pick up the pieces.

In a hybrid car, the HHO gas is added to the existing mist and then this new mixture is burned in the engine. So why would we want to burn this new mixture?

rebuild a car engine core The internal problem of surfaces squeezing out the oil and touching is called metal migration. The fastest type of wear out. The same thing happens, and more so, when your motor overheats and moving parts - so intensely hot from expansion, grind against each other on a massive scale. Expansion of hot metal parts and friction involved is what brings you to a cooking hot stop, along the side of the road. The term, "migration" means metal removed, moves elsewhere. Metal migration is the term for this type extreme wear.

Do your research. When you rebuild, work out if you are going for a stock replacement of broken/worn parts, or a full rebuild using forged internals. Work out your budget and try to stick to it. If possible, get the factory workshop manual for your engine, or a Haynes/Chilton's manual. Review it before you pick up a wrench and figure out what you are going to do and how you're going to do it. Surprises are good at Christmas, but not when when you're trying to take apart a motor. If you can't find information in there, try to find a respected source on the internet. And make sure you get the CORRECT manual (i.e. if you have a 7-bolt 4G63 engine don't use a 6-bolt 4G63 engine guide and think that everything will be the same. It won't).

And now you too can build a car engine your own fuel savings device to create HHO gas in a couple of days and install it in your car and save a ton on fuel like thousands of others are doing. The device allows for more complete combustion and engine temps run cooler so your hydrogen generator will also increase the life of your engine.

Blue smoke means it is time to go back to bed. Blue smoke is usually a sign of problems down in the important parts of the engine block. We are talking cylinder, piston or valve problems. The blue smoke comes from the excessive burning of oil and generally is a bad sign. The problem is you usually have to rebuild the entire engine. If you just try to do a bit, the new parts may create a better seal. This will add pressure to the engine compartment and blow out other worn parts that were not replaced.